Measuring Tape Loop Earrings

So I recently finished high school. The exams were pretty tough, but deciding on what earrings to make various teachers as gifts may have been slightly tougher. With Christmas coming up, these earrings would be a great gift for someone creatoive and a tad eccentric like my history teacher, or just make them for yourself.

You Will Need:

• Fabric measuring tape

•  Scissors

•  a Nail or some other sharp object

•  a Hammer

•  a scrap plank or board

•  Basic hooks (See Vocab Tab)

•  Round-nosed Pliers (See Vocab Tab)

How To:

Take the fabric measuring tape and cut off the metal end, then cut off two equal lengths. I made mine from 10cm each. I wanted mine to show mostly the centimeter side because we're South African, but as you can see both sides show.

Lay whichever side you want to see more of facing up and then move one end sideways until it's on top of the other end. This forms the slightly twisted teardrop shape because I thought that a plain hoop would be less effective. 

Hold the ends in place and put the loop on the scrap plank or board. This plank will give you something to hammer the nail into so that you don't damage the surface underneath, but it won't be necessary if you can think of a better way to punch a hole into the top of the earring. Carefully place the point of the nail where you want to punch the hole, bearing in mind that you're going to cut the edge to make it smoothe and you don't want it to tear, and hammer it in. Not all the way, but just enough to punch a hole.

Leave the earring impaled on the nail while you cut the top edges smooth, bearing in mind once again that if the hole is too close to the top it will tear. take the earring off and then use the round-nosed pliers to attach the basic hook to the earring. 

Rating:

Effort Required: 4/10

They don't take long to make, but it can be quite frustrating to direct the curved hook loop through the tiny hole. Overall there are more challenging earrings to make.

Durability: 8/10

The plus side is that fabric measuring tape is vinyl covered fibreglass, it was made for strength. Who knew sewing could be so hardcore? These are waterproof and super resistant, though I cannot vouch for their fireproofing abilities. The only problem is tearing. One of these tore and I had to make a new one, so just be careful.

Cool Factor: 7/10

These earrings are pretty cool. They're difinately qwerky and original, not to mention that measuring tape comes in all kinds of awesome designs and pretty colours. This is a great way to own your love for craft and sewing and a great gift for someone with these traits.

Let us know what you think! Your input is greatly appreciated, so let us know if you have any comments, challenges, suggestions or feedback of any sort. We want to see your finished product!  If you like what you see then please follow us and if you want to keep up to date on our latest posts, follow My Earring Board on Pinterest. Thanks for taking the time to view our blog!

Wooden Cut Out Earrings

I would love to have a laser cutter to make earrings in any shape my mind can conceive but such a thing goes against everything we stand for on this blog. We use what we have.

These material-covered wooden cut-outs are cheaply and abundantly available at craft shops. The beauty of these is that you can improve them with a little paint, decoupage or even a fine liner. These were originally plain red butterflies and look at them now! They're plain red butterflies with patterns on!

You will need:

• Two wooden cut-outs in the desired shape, decorated however you see fit.
• A drill with a 1 mm bit
• Two loop-end wire pins (See vocab Tab)
• Round-nosed pliers (See vocab Tab)
• Two basic earring hooks (See vocab Tab)

Method:

Drill a hole in the appropriate section of each of your shapes. Just make sure the hole is in the same place for both earrings.

Push the end of the wire pin through the hole so that there is about 7.5 mm sticking out. Bend the main section of the pin upwards to create a right-angle and then bend the sticky-out bit up behind the shape until it meets the main pin and forms a kind of triangle with it.

Attach the basic hook to the loop at the the top of the pin and then check the direction and angle the earring hangs at. If you're not happy with it you can change the angle by bending the wire pin, or the direction the earring faces, by holding the loop at the top of the pin secure with the pliers and slowly turning the shape to rotate the loop until it's facing the right direction.

Rating:

Effort Required: 3/10

Working with wire is like holding a newborn baby: it's easy once you learn how to make sure it doesn't bend in the wrong places.

Durability: 9/10

It's always nice to be able to put on earrings without having to worry about the weather. 

Cool Factor: 5.5/10

Don't get me wrong; they're nice, light, practical, big enough to be noticed and subtle enough not to be weird. They match well. You can make them unique and own a whole bunch in various colours, sizes and shapes. In some ways they are actually the perfect DIY earrings. In other ways though, meh.

Pretty Bow Earrings

Remember me? I know it's been a LONG time since I've posted, but I've had a lot of things going on. I'm afraid it may be a while before you hear from me again, I am in a brief period of holidays before I begin writing my finals. Also, my older sister has moved to Poland. She will no longer be gracing us with her posts. I have one or two in the archives, but I'm afraid that from now on you're stuck with me.

 You Will Need:

• Two pretty bows. Choose the colour, type, pattern and size according to preference. If you can't find anything you like, make your own. Just an idea, use red and white polka dotted bows reminiscent of Minnie Mouse. I much prefer green though.

• Loop-end Wire Pins (See Vocab Tab) 

• Round-nosed Pliers (See Vocab Tab)

• Cutters (See Vocab Tab)

• Basic Hooks (See Vocab Tab)

How To:

Take a loop-end wire pin and thread it through the middle part of your bow. Be careful not to damage the bow in any way while you do this. Next, take your round-nosed pliers and bend the pin into a vaguely triangular shape. Use the cutters to cut off the excess. 

Use the round-nosed pliers to attach the basic hook to the loop of the pin. Use the pliers to bend the wire holding the bow slightly forward to adjust the angle at which the bows hang. Do this as many times as it takes for you to be satisfied.

Rating:

Effort Required: 2/10

They don't take much time or effort to make. The hardest part is finding the bows you like, really. They took me roughly 6 minutes to make.

Durability: 7/10

I admit that I have yet to wear them. I kind of just decided that I needed to post today and so I whipped these up, but as a general rule, the simpler the earring, the more durable they are.

Cool Factor: 5/10

The cool factor depends entirely on your choice of bows. Obviously it would greatly increase if you made them yourself, instead of using store bought ones like I did. But there's just so much potential here! With Christmas coming up, these would make a great (cost effective, yet touchingly homemade) gift and could even add a little festive feel to your outfit. I really like that they dangle and, though bow earrings are pretty popular, they're normally made of metal and are attached to studs.

Let us know what you think! Your input is greatly appreciated, so let us know if you have any comments, challenges, suggestions or feedback of any sort. We want to see your finished product!  If you like what you see then please follow us and if you want to keep up to date on our latest posts, follow My Earring Board on Pinterest. Thanks for taking the time to view our blog!

Felt Flower Earrings

This is more of an idea for an idea

You will need:

• Felt
• A felt-tip pen (Wait, felt can't write on felt! What kind of stupid name is that?) 
• Scissors
• embroidery thread
• A needle
• Super Glue
• Basic studs (See Vocab Tab)

How it's done:

Real simple: draw a small flower shape on the felt and cut it out. Using the needle and embroidery thread stitch a couple of stitches which cross each other at various angles in the middle of the flower. Make sure to start and end off with a double stitch to keep it secure. Super glue the stud to the back of the flower.

Rating:

Effort Required: 3/10

Quick and simple!

Durability: 9/10

They can withstand wind, water, sleep and even violent hugs.

Cool Factor: 5/10

The cool part about these is that they're not just felt flower earrings. They represent endless possibilities for earrings made of felt. They represent hope and versatility and the dying art of stitching stuff. They represent colour and peace and happiness and all those other reasons hippies protested against war. All you see are the flowers though.

Ear Phone Earrings

Teaching has some strange perks. The joy of finding an abandoned set of broken earphones on the classroom floor has been one of my strangest.

You will Need:

• A set of broken earphones. I guess they don't have to be broken when you start but it's always nice not to waste. If they're already broken you get to make something cool out of something useless. You could even call it up-cycling, if you wanted to get fancy about it but I've always thought that the term sounds kind of like an exercise program that's destined for failure.
• Scissors
• Super Glue 
• Basic studs (See Vocab Tab)

How it's Done:

Step one is to cut off the ear pieces, leaving about a thumb length of cord attached to each. 

Step two is to carefully strip the cord (take off the rubbery covering to expose the wires inside) making sure you don't cut the wires in the process. Remove all the covering you can or the effect is somewhat spoiled. In this pair the wires were different colours on each side. This discovery made me happy because all the time I've spent checking my earphones end up in the right ear wasn't a complete waste. It also makes for prettier earrings.

Step three is to wrap the the wires around the ear piece in a criss-cross pattern and then tie a bow in it. Getting the bow right is quite tricky and takes some patience.

Step four depends on what you're working with. If the speaker part of the earphone is still attached and is relatively flat, just super glue the earring stud straight on. If this is not the case, first remove the speaker part from both earrings and then glue some of the cord you cut off, in a coil inside the ear piece to create a fairly level surface you can glue the stud onto.

The final step is to apply a small amount of super glue to each point on your decorative criss-cross where the wires meet. This is to hold them in place and stop them coming undone or slipping off. Keep the gluing subtle though.

Rating:

Effort Required: 5/10

You could save yourself some trouble and just cut the wire off completely but the criss-crossing has the double function of finishing off the earrings and giving them a way to end without making it look like you've performed some kind of brutal decapitation.

Durability: 6/10

The danger with these is not gluing well enough, especially if you stuffed them.

Cool Factor: 8/10

People who think they're cool walk around with earphones in their ears. People who are cool wear them on their ears. It's that simple. 

Postage Stamp Earrings

You know how bored people used to collect books full stamps? Well, my aunt was one of those people. And in case you didn't know, postage stamps are sometimes extremely cool. So I sought a way to combine the awesomeness of earrings with that of stamps and this is the tutorial I came up with to share with you lovely people. Hope you appreciate this... post. Haha, get it? Because they're stamps :)

You will need:

• Two postage stamps of roughly the same size. If you have a pair of identical stamps, great. If not, do what I did and just try to make sure that the stamps you choose are similar or different enough to be cool. Be sure to choose the coolest stamps you can find, but also be mindful of size. Mine are the smaller end of the scale so that they're less irritating. There were some super cool Alice in Wonderland, Benjamin Rabbit and Harry Potter special editions that were just too ridiculously big to use without cutting.

• Cardboard. It needs to be pretty thick, like, thicker than a cereal box, but thinner than corrugated cardboard. I think I used the bottom of a Lindt chocolate box. By all means, use these earrings as an excuse to buy yourself a box of chocolates.

• A needle

• A hammer or something heavy to use as such. 

• Glue

• Scissors

• Clear packaging tape or that clear sticky plastic they use for covering books

• Basic Hooks (See Vocab Tab)

• Round-nosed pliers (See Vocab Tab)

How To:

Glue the stamps to the cardboard and then carefully cut around the reinforced stamps when the glue is dry. If you want to test your patience to the max, try and cut in between the little stamp frills. Alas, I, lacking the patience of a saint, opted for the simpler option of cutting a straight line along the frills. I get away with it because my under cardboard is white.

Then take the little cardboard stamps and cover them, front and back, with whatever form of clear sticky plastic you are using. Make sure you cover the whole thing to seal it properly against moisture.Try and keep any overlapping edges neat and to a minimum.

Lay them flat and use the needle and hammer to pierce holes in the top corner of each stamp. They hang in reflection to the other, so the one going in the left gets a hole in the top left corner, and the one going in the right gets a hole in the top right corner. Make sure you leave enough space for the hole to be secure, but not so much that it messes with the aesthetics of the stamp. 

Use the round-nosed pliers to bend open the loops at the bottom of the basic hooks and attach them by the holes in the stamps. Then close the loops.

Rating:

Effort required: 3.5/10

On the whole, these don't take a lot of time or effort to make. The part that gets a little finicky is the covering with plastic because sticky does not have much discretion.

Durability: 6/10

When you consider they're made of paper and cardboard, that's pretty good. They're not particularly elaborate, hence higher durability. This score does however, depend on the thickness of your cardboard, the placement of your holes and your taping prowess. 

Cool Factor: 7/10 

What I like about these is the history involved. Stamps are cool. And they're even cooler because the art of stamp collecting has been somewhat lost on our generation. They're vintage and unique, if you choose the right stamps. The idea has been done before, but not in this way (I googled it) so if you wear them out, you aren't likely to meet someone wearing the same thing (unless they too, are part of our slowly increasing fan-base). They are not always immediately identifiable, but they're still pretty.

Let us know what you think! Your input is greatly appreciated, so let us know if you have any comments, challenges, suggestions or feedback of any sort. We want to see your finished product!  If you like what you see then please follow us and if you want to keep up to date on our latest posts, follow My Earring Board on Pinterest. Thanks for taking the time to view our blog!

Army Man Earrings

I stumbled upon these two while looking for Lego in a decaying bag of leftovers from my brother's childhood. I enjoy the army-man/waitress combination because it looks like you're making a political statement when all you're really doing is wearing toys.

                         

Materials required for idea implementation:

• Two army men or any kind of small plastic figurine. These two are Micromen. I'm not sure of they're still a thing.
• A drill with a thin bit
• 4 jump-rings (See Vocab Tab)
• Basic Hooks (See Vocab Tab)
• Round-nosed pliers (See Vocab Tab)

Actions required for idea implementation

The man and the lady of this pair were made differently. The waitress lady was fortunately made angrier than the guy with the gun. Her arm made a good loop for me to put the jump-ring through. The designer of the soldier was not so considerate. I had to drill a hole in the corresponding place on his body to put the jump-ring through so that both earrings would hang at more or less the same angle.

You'll have to go through a similar process of examination and logical hole-drilling in order to attach your first set of jump rings. 

The second set of jump-rings is to make sure that the earrings hang facing outwards. For every one you add you get a 90 degree rotation. Play around with the number you use until you get the right length and angle.

Finally attach the basic hooks to the topmost jump-ring.

Rating

Effort Required: 2/10

The standard drill-a-hole-and-put-a-jump-ring-through-it score for this blog. I would increase it since it's usually more than one jump-ring, but sometimes you don't even need to drill a hole so it all evens out.

Durability: 8/10

The beauty of making earrings out of stuff that was originally intended to withstand children.

Cool Factor: 7/10

Again, this will depend on the figurines you use. Mine are pretty small and light-weight so they tend to go wandering off into my hair. The matching but not really matching thing is cool though. I feel like people get more excited when they have to put in the effort of checking both the earrings you're wearing.

    

Beaded Bobby Pin Earrings

I saw a version of these earrings on Pinterest and thought they looked really cool. There was no tutorial, but I gave them a go and made up my own.

You will need:

• Seed beads in varying colours and sizes. The ones that I had were a tad too big, but I used them anyway.

• Round-nosed pliers (See Vocab Tab)

• Cutters (See Vocab Tab)

• Flat-end wire pins  (See Vocab Tab) 

Method

Before I start, here is an expertly drawn diagram of the earring by itself. 

 

First, decide on the bead sequence. For best results, arrange them in order of size. The amount depends on the size of your beads and the desired length. I used 7 beads and mine are about 2cm long. 

When selecting you wire, make sure that it isn't too thick to go through your earring holes. Start threading the beads onto the wire, beginning with the smallest bead. When the beads are all threaded use the round-nosed pliers to bend a right angle in the wire as close to the top bead as possible. 

Then continue to bend the approximate shape of the wire in my illustration. It doesn't have to be exact because you can easily adjust them once you've tried them out.When you have the general shape, cut off the excess wire using the cutters.

To put them on, simply hook them through your ears and then pull them up so that they run parallel to the lobe. You may find that you need to make them tighter, or that the line of beads runs too straight, so just take them out adjust them.

Effort Required: 2/10

Overall, they took me about 5 minutes to make. It's really not a lot of work.

Durability: 9/10

There isn't much you can do to break these bad boys without hurting yourself. They aren't bulletproof, unfortunately, but you can do almost anything to them and they won't budge. Just make sure that they are tight enough and you're good. If they do bend out of shape from something, you can just bend them back again, no biggie. 

Cool Factor: 5/10

These are what I like to call my 'lazy earrings'. If I'm going somewhere and I don't feel like coordinating, I just put these in. It's a relatively obscure type of earring, so they aren't too common just yet. It also depends on your colour choice, but these earrings really open up a world of possibilities. Who knows, you may be seeing more of this earring base in the future. 

Let us know what you think! Your input is greatly appreciated, so if you have any comments, challenges, suggestions or feedback of any sort. If you like what you see then please follow us and  if you want to keep up to date on our latest posts, follow My Earring Board on Pinterest. Thanks for taking the time to view our blog!

Leather Loop Earrings

My sister is in Johannesburg for two weeks, so I'll be posting until she gets back. These earrings are actually the result of my brother, who bought a really cool bottle of Poncho's Coffee Tequila that comes with a pretty leather thing around it's neck. He wanted me to make him a manly leather bracelet out of it and this is what I did with the off-cuts.

You will need:

• Leather string

• Scissors

•  Basic hooks (See Vocab Tab)

• Loop-end wire pins (See Vocab Tab)

• Round-nosed pliers (See Vocab Tab)

• Cutters (See Vocab Tab)

Method

Cut two equal lengths of leather string, roughly 10cm in length. Bend them in half and tie them in a knot where the two ends meet at the top. Use the pliers and cutters to bend the loop end wire pin around the base of the knot and cut off excess. Attach the loops of the pins to the basic hooks and viola!

Effort Required: 2/10

There is very little to do to make these earrings because they are extremely simple. They took me a minute to make. If you have any suggestions or ideas to make them more complex or more effective please leave a comment.

Durability: 7/10

The upside of them being so simple is that there isn't much that can break. They tend to get hooked on things, but because it's a pretty big loop they normally unhook themselves. 

Cool Factor: 4.5/10

They may be simple, but there is definitely something to be said of their simplicity. They're elegant and pretty, but random enough to deserve a spot on here on Glue and Random Objects. They are not very effective if you have brown hair and they are not incredibly original, but they match with pretty much anything and they are worth making, considering the time and effort involved to achieve the overall effect.

Let us know what you think! Your input is greatly appreciated, so if you have any comments, challenges, suggestions or feedback of any sort. If you like what you see then please follow us and  if you want to keep up to date on our latest posts, follow My Earring Board on Pinterest.

Front and Back Perry the Platypus Earrings

"Doo bee doo bee doo wah, doo bee doo bee doo wah. He's a semi-aquatic, ear lobe dwelling mammal of action"... So Phineas and Ferb is one of my all time favorite cartoons and Perry the Platypus is my all time favorite cartoon character. We recently reached 1000 page views, so as a thank you, I am posting what could be the coolest earrings I've ever made. 

You will need:

• Clay in blue, yellow, red, white and black. I used Crazy Clay by Bostik, the same clay as the Biscuit Earrings. The soft, spongy nature of this clay is particularly important for this project because you need to be able to cut it when it's dry. If you don't like mixing colours, get clay in black, white, teal and orange. However these particular colours are quite specific, so I would advise mixing the colours yourself for accuracy.

• A place mat or clean working surface.

• Superglue

• Scissors

• Basic studs (See Vocab Tab)

 Method

 

To mix the super specific teal colour of Perry, use blue, yellow and white. First mix the blue and yellow in a ratio roughly 2 is to 1, maybe less than 1, to form a dark ugly green. Add white until you are satisfied. It helps to look up a picture of him. But do not be fooled, Perry is teal and not blue. Use a picture of him from an actual episode for best results. You then need to mix a small amount of pale orange by mixing yellow, white and red in an approximate ratio of 3:2:1. Remember, you are mixing enough for 2 Perries. One for each ear. Divide both colours in half and lay one half aside for the second earring. 

To form the body, make a soft rectangular prism about 2.5 cm x 1.5 cm, 2 cm high. Leave a tiny piece of teal clay for the comb later on. If you prefer smaller earrings, make adjustments, but remember that the smaller you make them, the more difficult and less effective they are. 

Pinch out four legs on the corners of the body. I do not recommend attaching here because it messes with the shape of the body and just adds more problems later on if it's not done properly. Make sure that the back legs are shorter than the front legs to allow space for the back feet. Take the piece of teal clay that you saved and roll it into a small sausage. Pinch a little spike in the middle and then fold all three points upwards to form Perry's cool spiky 'do. Attach the hair on the top of the body at the front end, the one with longer legs. 

Next take the orange clay you mixed and pinch some off. Use this to create a soft, flatish tapered rectangle for the tail. Use the scissors or a knife to etch shallow criss-cross cuts on it to form the little pattern on Perry's tail. Stick it on the back end of the body, the one with the shorter legs, and then bend it so it looks like it's trailing on the floor.

Take the left over orange and pinch off two equal sized pieces for the feet. There must still be some orange left over for the bill. To make the feet, roll the pieces into ovals, then squish them gently to flatten them. Attach the feet onto the shorter legs bu the tail. Take the remaining orange clay and make the bill look like the one in the picture. I honestly cannot explain how I did it, partly because I don't remember. I think I started with a thick sausage and flattened one end. Anyway, when that's done attach it to the front end of the body, the one with the hair and without the tail. Make sure it's not too low down and remember that the eyes will go on either side of the nose bridge. 

To make the eyes, simply roll two equal oval balls in white. Take a small amount of black and split it into two tiny black balls. Flatten the black and stick each onto their respective white eyeball. Then stick the eyes close together on either side of the bill bridge on the front end.

Go back and make a second Perry, then keep them somewhere out of reach of children and dream crushers while you wait for them to dry.

I waited about 2 days for my clay to dry completely. It's important that you wait for them to dry fully before you go further, because otherwise the shape will change and all your work will be for nothing. When they're dry, cut the bodies in half, just behind the front legs. Make a small slit in the back end to implant the butterfly of the basic studs. Superglue the butterfly in place so that it doesn't stick out. The superglue the front ends of the basic studs on to the front end of Perry. Be generous with the superglue as this clay is quite absorbent. Wait for the glue to dry completely before putting them on. 

Rating: 

Effort Required: 7/10

They can be quite fidgety to make, but overall they just take up a lot of time, not so much effort. And they're totally worth it!

Durability: 6/10

They're quite durable compared to the Biscuit Earrings, but just remember that there are many parts that they consist of and they can get easily snagged. Keep them away from water, exuberant hugs and curious fingers.

Cool Factor: 10/10

These are the coolest earrings I've made yet by far. The responses to these have been awesome, I even got one, 'oh, there you are Perry'. I think I did Perry the Platypus proud. These are seriously worth everything it took to make them. Plus the front and back thing really adds to the overall effect. 

Thank you so much for reading our posts so far. If you like what you see please follow us and if you make any of our earrings please let us know what you think. Any comments, challenges, suggestions or feedback of any sort would be greatly appreciated. Also, if you want to keep up to date, follow My Earring Board on Pinterest.

Ear Shades (Earring Sunglasses)

Our family was invited to my cousin's 21st birthday and on the invitation, it said the theme was, "Splarkle, shades and style." So my sister, being my sister, refused to submit to the ordinary wearing of sunglasses and commissioned these earrings from me. I loved them so much that I made us each a pair.

You Will Need:

• Wire. Once again I have no idea how much you need, but wire is a useful thing to have around the house, especially if you want to  continue to follow our posts.

• Cellophane in a dark colour. I used a dark-blueish purple.

• Pen/pencil and paper (optional)

• Superglue

• Scissors 

• Basic hooks (See Vocab Tab) 

• Round-nosed pliers  (See Vocab Tab) 

• Cutters (See Vocab Tab) 

Method

 

*NOTE* When I'm talking about "pair" I may be referring to  a pair of sunglasses ( ONE EARRING) or a pair of earrings (TWO SUNGLASSES)

I apologize for my wire work. I am not the neatest person around and I wasn't really trying to be neat when I made these. They are quite finicky, so after making two of the little blighters for my sister, the only thing I cared about was retaining the use of my supegluey fingers. 

You can start by drawing the desired size and shape of your glasses on paper as a guideline, or you can just jump right in and get down to work like I did (as you can see in the picture).

Cut off two equal pieces of wire using the cutters. I have no idea of the actual size, but rather make them too long than too short. I'd say roughly 15 cm. Put one piece to the side for your other earring. 

 I have done a cute little sketch to show you what I'm going on about.

1. Loosely bend the wire in half to make the bridge.
2. Use an object (a pencil's a little too small) or your estimation to bend two equal lens shapes.
3. From now on the drawing focuses on one lens only because what you do to one you do to the other. Ain't nobody got time to draw both sides. Bend the wire to a 90 degree angle to form the top of the lens.
4. Bend the wire around the bridge and pinch it closed. Follow the line of the top of the frame to get back to the outer corner.
5. Bend the wire back to form the arm of the glasses
6. Bend the end of the wire back to the outer corner of the frame
7. Pinch it closed
8. Bend the end of the arm in a slight downward curve to look like it would rest on a really tiny ear.

REPEAT FOR OTHER LENS OF THAT PAIR AND THEN MAKE ANOTHER PAIR OF GLASSES.

Cut four pieces of cellophane that are the same size and shape as the wire lens frame. Use superglue and a huge amount of patience to attach the lenses to each frame, leaving a little of the outer corner of one side unglued to allow the earring to go through. Wait for the glue to dry before attaching the basic hooks to one outer corner of each pair of glasses. 

Rating:

Effort Required: 8/10

Compared to the other earrings we've posted, these are like Earring-Zilla. They are extremely frustrating to make and it took me about 15 minutes per pair (I made four), just for the wire work. The glueing takes at least another 5 minutes per pair.

Durability: 3/10

This depends on the wire and superglue you use. I used the same wire as the G-Clef Earrings so it's easy to bend. Avoid hugs and admiring fingers, but the plus side is that they're really easy to fix by just bending them back to the right place if a mishap befalls them.

Cool Factor: 6/10

It depends on their size and colour, but they're not the most in-your-face earrings ever. However, people love them when they notice them and they got some great reactions at the 21st. Please not that these are not UV resistant and Glue and Random Objects will not be held responsible for uneven ear or neck tans.

If you have any questions, hate mail, comments, challenges or suggestions please feel free to make contact with the nifty little comment box below. Also, if you want to keep up to date on our latest posts, follow my earring board on Pinterest.